Loading ...
Loading ...
Loading ...
18
Important!
RINSE WITH WATER ONLY
NO WASHING UP LIQUID NO DISH WASHER
Clean the infuser without using washing up liquid as it
could be damaged.
5. Use the brush (C2) to remove any coee residues left in the
infuser housing, visible through the infuser door.
6. After cleaning, replace the infuser by sliding it onto the
internal support (g. 32), then push the PUSH symbol fully
in until it clicks into place.
Please note!
If the infuser is dicult to insert, before insertion, adapt it to the
right size by pressing the two levers shown in g. 33.
33
.
7. Once inserted, make sure the two red buttons have
snapped out (g. 34).
8. Close the infuser door (A16).
Cleaning the milk container
To keep the frother ecient, clean the milk container as de-
scribed below, every two days:
1. Remove the lid (g. 17).
2. Remove the milk spout and intake tube (g. 35).
3. Turn anticlockwise the froth regulator to the “INSERT” posi-
tion (g. 35) and pull it o outwards.
35
4. Wash all the components thoroughly with hot water and
mild washing-up liquid. All components are dishwasher
safe, placing them in the top basket of the dishwasher.
Make sure there are no milk residues on the hollow and
groove under the dial (g. 36). If necessary, scrape the
groove with a toothpick.
36 37
5. Rinse inside the froth adjustment dial seat with running
water (g. 37).
6. Check that the intake tube and spout are not clogged with
milk residues.
7. Replace the dial (in correspondence to the word “INSERT”),
spout and milk intake tube.
8. Place the lid back on the milk container.
Cleaning the hot water/steam connection nozzle
Each time you prepare milk, clean the connection nozzle with a
sponge to remove milk residues from the gaskets (g. 24).
DESCALING
Descale the machine when the message “DESCALE” ashes on
the display.
Important!
• Descaler contains acids which may irritate the skin and
eyes. It is vital to respect the manufacturer’s safety warn-
ings given on the descaler pack and the warnings relating
to the procedure to follow in the event of contact with the
skin and eyes.
• You should use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may re-
sult in faults not covered by the manufacturer’s guarantee.
1. Turn the coee machine on.
2. Press the
icon (B2)to enter the menu.
3. Press
or (g. 5) until “Descaling” is displayed.
4. Press the
icon (g.6), “Conrm?” is displayed. Press the
icon to conrm.
Loading ...
Loading ...
Loading ...