Loading ...
Loading ...
Loading ...
16
2. Place a cup or other recipient under the milk spout (g.
22).
3. Turn the froth adjustment dial to “CLEAN” (g. 23). A pro-
gress bar appears and gradually lls as the operation pro-
ceeds together with “Cleaning underway”. Cleaning stops
automatically.
4. Turn the dial back to one of the froth selections.
5. Remove the milk container and always clean the steam
connection nozzle with a sponge (g. 24).
Please note!
• To prepare a number of cappuccinos or milk based coees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.
Programming the quantity of coee and milk in
the cup for the CAPPUCCINO icon
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coee spouts and milk spout (g.
22).
2. Press and hold the
CAPPUCCINO icon (B9) until and the
name of the drink and “PROGRAM MILK” are displayed.
3. Release the icon. The appliance starts delivering milk.
4. Once the required quantity of milk has been delivered into
the cup, press the icon again.
5. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coee is de-
livered into the cup. The name of the drink and “PROGRAM
COFFEE” are displayed.
6. As soon as the coee in the cup reaches the required level,
press the icon again. Coee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
Programming the quantity of coee and milk in
the cup for MILK MENU icon drinks
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Press the
MILK MENU icon (B8).
2. Press
or (g. 5) until the required drink is dis-
played (CAFFELATTE, MACCHIATO, FLAT WHITE, MILK).
3. Press and hold the icon (g. 6) until and the name of
the drink and “PROGRAM MILK” are displayed.
4. Release the icon. The appliance starts delivering milk.
5. When the required quantity of milk has been delivered into
the cup, press the
icon
.
6. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coee is de-
livered into the cup. The name of the drink and “PROGRAM
COFFEE” are displayed.
7. As soon as the coee in the cup reaches the required level,
press the
icon again. Coee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
DELIVERING HOT WATER
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
Please note!
If “energy saving” mode is active, you may have to wait a few
seconds before the hot water is delivered.
1. Make sure the hot water spout is attached correctly (g. 7).
2. Place a container under the spout (as close as possible to
avoid splashes).
3. Press the
icon (B1). “HOT WATER” is displayed, togeth-
er with a progress bar which lls gradually as preparation
proceeds.
4. The machine delivers about 250 ml of hot water, then de-
livery stops automatically. To interrupt delivery of the hot
water manually, press the
icon again.
Changing the quantity of water delivered
automatically.
The machine is set by default to automatically deliver 250 ml of
hot water. To modify these quantities, proceed as follows:
1. Position a container under the spout (g. 7).
2. Press the
icon (B1) again until “HOT WATER Program
Quantity” is displayed, then release the icon.
3. When the hot water in the cup reaches the required level,
press the
icon again.
The machine is now reprogrammed with the new quantity.
CLEANING
Cleaning the machine
The following parts of the machine must be cleaned regularly:
- coee grounds container (A13),
- drip tray (A12),
- water tank (A18),
- coee spouts (A8),
- pre-ground coee funnel (A2),
- infuser (A17), accessible after opening the service door (A16),
- touch screen (B)
- milk container (D)
Loading ...
Loading ...
Loading ...