Loading ...
Loading ...
Loading ...
22 23
Setting and Resetting Lock
This locks the buttons on the control panel.
•
When you press the Lock button for three
seconds, the Set/Reset icon on the control panel
lights. The function is enabled and disabled in
turn each time you press the button.
•
If you press a button other than lock when the
child lock is set, the button will not function.
•
When you press a button other than lock when
the child lock is set, the Set/Reset icon on the
control panel will ash 3 times.
•
To change a setting, rst press the Lock button
for three seconds to disable the function.
Setting Pure N Fresh (Optional)
Bacteria and odor inside the appliance can
be minimized with the Pure N Fresh function.
However, the function is only effective for bacteria
oating in the appliance, not bacteria adsorbed
onto food.
Icemaker
This is where ice is manually produced and stored.
Making Ice
[Type1]
1
Hold the handle of ice tray and pull it out.
2
Fill the ice tray with water so that all the
cubes are equally full.
3
Place the ice tray back to its position
carefully not to spill water on the oor.
CAUTION
•
Be careful not to spill water when inserting the
ice tray after lling with water.
[Type2]
Fill the icetray with water so that all the cubes
are equally full. And place it in the freezer
compartment.
Taking Out Ice
[Type1]
1
Rotate the ice separation handle on the
icemaker clockwise.
2
Lift the ice storage bin slightly and remove.
[Type2]
Hold the icetray at its ends and twist gently.
CAUTION
•
If you open and close the freezer door frequently,
it may take longer for water to be frozen.
•
The time for water to be frozen may vary
according to the season.Until 24 hours after initial
installation, the temperature inside the appliance
may not be stabilized so that it may take longer
for water to be frozen.
•
Make sure to be careful as the edges of the
ejected ice may be sharp.
NOTE
•
If ice cannot be detached easily, rotate the ice
separation handle of the icemaker once again.
•
Please note that ice may stick together if you
rotate the ice separation handle of the icemaker
before the water has completely frozen.
•
It takes approximately three hours for water at the
temperature of -20 °C to be frozen completely.
•
When placing the ice storage bin back to its
original position after using, make sure to check
if it is inserted all the way in.
•
The proper storage amount of the ice storage bin
is the amount of ice made three times. If more
than the amount of ice made for three times is
stored, the ice storage bin may not come out and
will become stuck. Do not store more than three
ejected ice trays of ice in the ice storage bin.
Removing the Icemaker (Optional)
1
Hold both edges of the freezer door basket
on top of the icemaker and remove it by
pulling it up.
2
Hold both edges of ice tray compartment
and remove it by pulling it up.
CAUTION
•
Remove in this order. Removing the ice tray rst
may cause damage.
•
When separating the icemaker, hold and remove
it properly to prevent the ice tray from falling off.
Loading ...
Loading ...
Loading ...