Loading ...
Loading ...
Loading ...
ENGLISH
8
Wake On LAN
• Set whether to use the ‘Wake On LAN’ feature.
• You can set ‘Wake On LAN’ to On or Off.
• If you set this feature to On, ‘Wake On LAN’ is enabled and you can turn the product on remotely via a LAN.
• If you set this feature to Off, ‘Wake On LAN’ is disabled.
(This feature may not be available with some models.)
DPM
• Set whether to use ‘Display Power Management (DPM)’.
• You can set this feature to Off, 5 sec, 10 sec, etc.
• If this feature is not set to Off, the monitor will enter Power Saving Mode when there is no input signal.
• If you set this feature to Off, DPM is disabled.
(This feature may not be available with some models.)
Digital Audio Input
• You can set the audio for each input as ‘Analog’ or ‘Digital’.
• In the case of RGB input, audio is fixed as ‘Analog’.
• In the case of digital input, you can select ‘Analog’ or ‘Digital’ for audio.
(This feature may not be available with some models.)
Speaker
• You can restrict the audio settings by choosing whether or not to use the speakers.
• If you set this feature to Off, audio output is disabled, and you cannot enter the ‘Audio’ menu.
• If you set this feature to On, audio output is enabled, and the ‘Audio’ menu is accessible.
(This feature may not be available with some models.)
Power On Delay
• When multiple monitors are connected, this feature enables the monitors to turn on at specified time intervals to
prevent overload. You can choose an interval value between 1 and 250 seconds.
(This feature may not be available with some models.)
Pivot Mode
• This feature allows you to rotate the screen 180 degrees.
• Both the input signal and OSD rotate.
• You can set this feature to On or Off.
• If you set this feature to Off, the function is disabled.
• If you set this feature to On, the screen rotates 180°.
• If any changes are made, they are applied after reboot.
(This feature may not be available with some models.)
OSD Portrait Mode (Off, 90, 270)
• This feature allows you to rotate the OSD clockwise.
• You can set this feature to Off/90/270.
• If you set this feature to Off, the function is disabled.
• If you set this feature to 90, the OSD rotates clockwise 90 degrees.
• If you set this feature to 270, the OSD rotates clockwise 270 degrees.
(This feature may not be available with some models.)
Loading ...
Loading ...
Loading ...