Loading ...
Loading ...
Loading ...
Page 6 of 24 802258 - B, BA, BHA, BAHA, - HydroTap User Guide - July 2015 - V2.00
3. Tap operation
To dispense boiling water: (With the safety OFF)
HydroTap Classic:
Depressing the Red lever allows the
dispensing of boiling water.
Pulling forward the Red lever allows the
tap to operate in a “no-touch” mode.
Water will flow from between 5 and 15
seconds (This is user adjustable).
To reset, return the handle to the “Off”
position and repeat the step. The lever
has to be manually returned to the “Off”
position.
Elite Tap:
Touching the boiling button allows the
dispensing of boiling water.
HydroTap Arc/Cube:
If not showing RED, tap the select button until
the indicator light turns RED.
Rotating the control, when the indicator light is
RED, allows the dispensing of boiling water.
Press or pull lever
Elite Tap
To dispense Boiling
water:
(With the safety ON)
HydroTap Classic:
Depress the Red lever, while
simultaneously covering the safety lock
button with a second finger. These two
actions need to occur within 2 seconds
for the successful dispensing of boiling
water.
Elite Tap:
Place a finger on the safety lock, then
touch the boiling button, while keeping
both fingers in position.
HydroTap Arc/Cube:
First tap the select button until the
indicator light turns RED. Then tap the
safety button twice until the RED light
flashes (This will flash for aprox 1-3
seconds if no water is being dispensed).
Boiling water may be dispensed by
rotating the control while the RED light
is flashing.
Safety Lock
Indicator
light
Arc/Cube Tap
Classic Tap
Loading ...
Loading ...
Loading ...