Loading ...
Loading ...
Loading ...
32
SQT0359 (ENG)
Basics
Taking pictures after automatically setting the
aperture value and shutter speed
([Program AE] Mode)
Take pictures using automatic aperture values and shutter speed settings in
accordance with the brightness of a subject.
1
Turn the aperture ring to select [A] (AUTO)
2
Turn the shutter speed dial to select [A] (AUTO)
[Program AE] Mode is set and the recording mode icon changes to [P].
3
Press the shutter button halfway
• If the aperture value and shutter speed flash red,
you do not have the correct exposure.
[ ] Program Shift
indication
Exposure
meter
4
While the numeric values are displayed in yellow (approximately
10 seconds), turn the control dial to change the values using Program
Shift
• To cancel Program Shift, either turn off the camera or turn the control dial
until the Program Shift indication turns off.
• To correct the exposure, use the exposure compensation dial to adjust the
compensation value. (→50)
Enabling/disabling the exposure meter display
→ [Custom] → [Expo.Meter] → [ON] / [OFF]
●
When you set this function to [ON], an exposure meter is displayed during
Program Shift, aperture setting, and shutter speed operation.
●
Proper exposure is not possible in the range indicated in red.
●
If the exposure meter is not displayed, press the [DISP.] button to switch the
display of the monitor.
●
The exposure meter will turn off if no operation is performed for approximately
4 seconds.
Loading ...
Loading ...
Loading ...