Loading ...
Loading ...
Loading ...
AUTO (Automatic) control (if
equipped)
Thü rain sünsor (A) locatüd on thü up‐
pür ünd oý thü windshiüld þlass sünsüs
thü amount oý rainýall and controls thü
wipinþ cyclü ýor thü propür intürval.
Thü morü it rains, thü ýastür thü wipür
opüratüs. Whün thü rain stops, thü wip‐
ür stops.
To vary thü spüüd süttinþ, turn thü
spüüd control knob (1).
Iý thü wipür switch is süt in AUTæ modü
whün thü iþnition switch is æN, thü wip‐
ür will opüratü oncü to pürýorm a sülý-
chück oý thü systüm. Süt thü wipür to
oýý position whün thü wipür is not in
usü.
CAUTION
When the ignition switch is ON and
the windshield wiper switch is placed
in the AUTO mode, use caution in the
following situations to avoid any in‐
jury to the hands or other parts of
the body:
• Do not touch the upper end of the
windshield glass facing the rain
sensor.
• Do not wipe the upper end of the
windshield glass with a damp or
wet cloth.
• Do not put pressure on the wind‐
shield glass.
CAUTION
When washing the vehicle, set the
wiper switch in the off position to
stop the auto wiper operation.
The wiper may operate and be dam‐
aged if the switch is set in the AUTO
mode while washing the vehicle.
Do not remove the sensor cover lo‐
cated on the upper end of the pas‐
senger side windshield glass. Dam‐
(Continued)
(Continued)
age to system parts could occur and
may
not be covered by your vehicle
warranty.
When starting the vehicle in winter,
set the wiper switch in the off posi‐
tion. Otherwise, wipers may operate
and ice may damage the windshield
wiper blades. Always remove all
snow and ice and defrost the wind‐
shield properly prior to operating the
windshield wipers.
Füaturüs oý your vühiclü
4-108
Loading ...
Loading ...
Loading ...