Loading ...
Loading ...
Loading ...
Cleaning function en
21
Enamel is baked on at very high temperatures.This
can cause some slight colour variation. This is
normal and does not affect operation.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
This does not impair the anti-corrosion protection.
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
Tips
Clean the cooking compartment after each use. This
will ensure that dirt cannot be baked on.
Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
Use the universal pan for baking very moist cakes.
Use suitable ovenware for roasting, e.g. a roasting
dish.
Where possible, use hot air. This type of heating
creates less dirt.
.Cleaning function
Cleaning function
Your appliance is equipped with a self-cleaning function
and EasyClean. You can use the self-cleaning function
to clean the cooking compartment. Use the EasyClean
cleaning aid for intermediate cleaning of the cooking
compartment. Dirt is softened beforehand using
EasyClean. It can then be removed more easily.
Self-cleaning
You can use the "Self-cleaning" operating mode to
clean the cooking compartment effortlessly. The
cooking compartment is heated up to a very high
temperature. Residues from roasting, grilling and
baking will burn.
You can choose from three cleaning settings.
The dirtier the cooking compartment and the longer the
dirt has been there, the higher the cleaning setting
should be. A cleaning cycle requires only approx. 2.5 –
4.7 kilowatt hours.
Note: For your safety, the cooking compartment door
locks automatically. It cannot be opened again until the
H symbol for the locking mechanism goes out in the
status bar. The interior lighting remains off during
cleaning.
:Warning
Risk of burns!
The cooking compartment becomes extremely hot
during the cleaning function. Never open the
appliance door. Allow the appliance to cool down.
Keep children away from the appliance.
Risk of burns!
; The appliance will become very hot on the
outside during the cleaning function. Never touch the
appliance door. Allow the appliance to cool down.
Keep children away from the appliance.
Prior to initiating the cleaning function
While cleaning is in progress, you can clean an
accessory at the same time, e.g. the universal pan or
the baking tray. Before cleaning is started, remove the
worst dirt. Slide the accessory in at level 2.
Clean the inside of the appliance door and along the
surface edges of the cooking compartment in the area
around the seal. Do not scrub the seal and do not
remove!
Note: When using the cleaning function, you can clean
the enamel accessory provided at the same time. You
cannot clean any of the wire racks when using the
cleaning function. The wire racks are not suitable for
cleaning using the cleaning function; this will discolour
them. Further accessories suitable for cleaning using
the cleaning function are listed in the table for special
accessories. ~ "Accessories" on page 11
:Warning
Risk of fire!
Loose food residues, grease and meat juices may
catch fire during the cleaning function. Before
starting the cleaning function, remove coarse dirt
from the cooking compartment and from the
accessories.
Risk of fire!
The appliance will become very hot on the outside
during the cleaning function. Never hang
combustible objects, e.g. tea towels, on the door
handle. Do not place anything against the front of
the appliance. Keep children away from the
appliance.
:Warning
Risk of serious damage to health!
The appliance will become very hot during the cleaning
function. The non-stick coating on baking trays and tins
is destroyed and noxious gases are released. Never
clean non-stick baking trays and baking tins using the
cleaning function. Only clean enamelled accessories
using the cleaning function.
Starting
1. Touch the # touch button.
2. Touch the 0 touch button.
3. Use the ( or ) button to select "Self-cleaning ˜".
4. Use the & button to navigate to the next line.
5. Use the ( or ) button to select the cleaning setting.
Note: Once it has started, the cleaning setting can
no longer be changed.
6. Use the & button to navigate to the next line.
7. Touch the # touch button.
The appliance starts self-cleaning.
Setting Cleaning level Duration
1 Light Approx. 1 hour, 15 minutes
2 Medium Approx. 1 hour, 30 minutes
3 Intensive Approx. 2 hours
Loading ...
Loading ...
Loading ...