Loading ...
Loading ...
Loading ...
FIRST TIME USE
1. SELECT THE LANGUAGE
You will need to set the language and the time
when you switch on the appliance for the first time:
“English” will show on the display.
English
Press or to scroll through the list of available
languages and select the one you require.
Press
to confirm your selection.
Please note: The language can subsequently be changed by
selecting “LANGUAGE” in “SETTINGS” menu, available by
pressing
.
2. SET THE TIME
After selecting the language, you will need to set the
current time: The two digits for the hour will flash on
the display.
CLOCK
Press or to set the current hour and press
: The two digits for the minutes will flash on the
display.
Press
or to set the minutes and press to
confirm.
Please note: You may need to set the time again following
lengthy power outages. Select “CLOCK” in “SETTINGS” menu,
available by pressing
.
3. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal. Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent
film from the oven and remove any accessories from
inside it.
Heat the oven to 200 °C for around one hour,
ideally using the “Fast preheat” function. Follow the
instructions for setting the function correctly.
Please note: It is advisable to air the room after using the
appliance for the rst time.
SMART CLEAN
The action of the steam released during this
special cleaning cycle allows dirt and food residues to
be removed with ease. Pour a cup of drinking water
into the supplied steamer bottom (3) only or on a
microwave proof container and activate the function.
Required accessories: Steamer
FAVORITE
For retrieving the list of 10 favorite functions.
SETTINGS
For adjusting the appliance settings.
When “ECO” mode is active the brightness of the display will
be reduced to save energy and lamp switches o after 1
minute. It will be reactivated automatically whenever any of
the buttons are pressed.
When “DEMO” is “On” all commands are active and menus
available but the oven doesn’t heat up. To deactivate this
mode, access “DEMO” from “SETTINGS” menu and select “O”.
By selecting “FACTORY RESET”, the product switches o and
then it returns to rst switch on. All settings will be deleted.
Loading ...
Loading ...
Loading ...