Loading ...
Loading ...
Loading ...
CLEANING
Make sure that the appliance has cooled down
before carrying out any maintenance or cleaning.
Never use steam cleaning equipment.
Do not use wire wool, abrasive scourers or
abrasive/corrosive cleaning agents, as these could
damage the surfaces of the appliance.
INTERIOR AND EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth. If
they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Clean the glass in the door with a suitable liquid
detergent.
• At regular intervals, or in case of spills, remove the
turntable and its support to clean the bottom of
the oven, removing all food residue.
• Activate the “Smart clean” function for an optimum
cleaning of the internal surfaces.
• The grill does not need to be cleaned as the
intense heat burns away any dirt. Use this function
on a regular basis.
ACCESSORIES
All accessories are dishwasher safe with the exception
of the Crisp plate.
The Crisp plate should be cleaned using water and
a mild detergent. For stubborn dirt, rub gently with
a cloth. Always leave the Crisp plate to cool down
before cleaning.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The oven is not working.
Power cut.
Disconnection from the mains.
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
The oven makes noises, even when it is
switched off.
Cooling fan active.
Open the door or hold or wait until the cooling process has
finished.
The display shows the letter “F” followed
by a number.
Software fault.
Turn o the oven and restart it to see if the problem persists.
Try to perform the “FACTORY RESET”, selectable from
“SETTINGS”. Contact you nearest Client After-sales Service
Centre and state the number following the letter “F”.
The oven does not heat up.
When “DEMO” is “On” all
commands are active and menus
available but the oven doesn’t
heat up. DEMO appears on display
every 60 seconds.
Access “DEMO” from “SETTINGS” and select “O”.
PRODUCT FICHE
WWW
The product fiche with energy data of this
appliance can be downloaded from Whirlpool
website docs . whirlpool . eu
CONTACTING OUR AFTERSALES SERVICE
You can find our contact details
in the warranty manual. When
contacting our Client After-sales
Service, please state the codes
provided on your product's
identification plate.
XXX/XXX
XXXXXXXXXXXX
XXXXXXXXXXXX
Loading ...
Loading ...