Loading ...
Loading ...
Loading ...
PARKVIEW REAR BACK UP C AMERA — IF EQUIPPED
The ParkView Rear Back Up Camera that allows you to see an on-screen image of your
vehicle's rear surroundings when the gear selector is put into REVERSE. The image will
be displayed on the touchscreen display along with a note to “check entire surroundings”
across the top of the screen. Af ter five seconds this note will disappear. The ParkView
camera is located above the rear license plate.
When the vehicle is shifted out of RE-
VERSE (with camera delay turned off), the
rear camera mode is exited and the naviga-
tion or audio screen appears again.
When the vehicle is shifted out of RE-
VERSE (with camera delay turned on), the
camera image will continue to be displayed
for up to 10 seconds af ter shifting out of
REVERSE unless the vehicle speed exceeds
8 mph (13 km/h), the vehicle is shifted into
PARK or the ignition is switched to STOP
mode.
A touchscreen button to disable the cam-
era is available when the vehicle is not in
REVERSE. Display of the camera image
after shifting out of REVERSE can be disabled via Uconnect Settings.
When enabled, active guide lines are overlaid on the image to illustrate the width of the
vehicle and its projected backup path based on the steering wheel position.
When enabled, fixed guide lines are overlaid on the image to illustrate the width of the
vehicle.
Different colored zones indicate the distance to the rear of the vehicle.
The following table shows the approximate distances for each zone:
Zone Distance To The Rear Of The Vehicle
Red 0-1ft(0-30cm)
Yellow 1 ft-3ft(30cm-1m)
Green 3ftorgreater(1morgreater)
NOTE:
If snow, ice, mud, or any foreign substance builds up on the camera lens, clean the lens,
rinse with water, and dry with a soft cloth. Do not cover the lens.
Parking Camera
OPERATING YOUR VEHICLE
86
Loading ...
Loading ...
Loading ...