Loading ...
Loading ...
Loading ...
Turning LaneSense On Or Off
The default status of LaneSense is “off”.
The LaneSense button is located on t he end of the turn signal stalk, located on the left
side of the steering column.
To turn the LaneSense system on, push the LaneSense button once.
A “Lane Sense On” message is shown in the instrument cluster dis-
play.
To turn the LaneSense system off, push the LaneSense button once.
NOTE:
The LaneSense system will retain the last system state on or off
from the last ignition cycle when the ignition is changed to RUN mode.
LaneSense Warning Message
The LaneSense system will indicate the current lane drift condition through the instru-
ment cluster display.
Base Instrument Cluster Display
When the LaneSense system is on, the lane lines are gray when both of the lane bound-
aries have not been detected and the LaneSense indicator is solid white.
Left Lane Departure — Only Left Lane Detected
• When the LaneSense system is on, the LaneSense indicator is solid white when only
the left lane marking has been detected and the system is ready to provide visual
warnings in the instrument cluster display if an unintentional lane departure occurs.
• When the LaneSense system senses the lane has been approached and is in a lane
departure situation, the left thick lane line flashes yellow (on/off), the left thin line re-
mains solid yellow and the LaneSense indicator changes from solid white to flashing
yellow.
NOTE:
The LaneSense system operates with the similar behavior for a right lane departure
when only the right lane marking has been detected.
Left Lane Departure — Both Lanes Detected
• When the LaneSense system is on, the lane lines turn from gray to white to indicate
that both of the lane markings have been detected. The LaneSense indicator is solid
green when both lane markings have been detected and the system is “armed” to pro-
vide visual warnings in the instrument cluster display and a torque warning in the
steering wheel if an unintentional lane departure occurs.
• When the LaneSense system senses a lane drift situation, the left thick lane line and
left thin line turn solid yellow. The LaneSense indicator changes from solid green to
solid yellow. At this time torque is applied to the steering wheel in the opposite direc-
tion of the lane boundary.
OPERATING YOUR VEHICLE
81
Loading ...
Loading ...
Loading ...