Loading ...
Loading ...
Loading ...
||
MAINTENANCE AND SERVICING
494
Trunk closing handle
The closing handle on the inside of the trunk
lid on the driver's side has to be removed.
3. Insert a flat object (kitchen knife, screwdriver,
etc.) to press in two catches and at the same
time fold out the handle. sBoth of the
catches have to be pressed in at the same
time in order to fold out and remove the
handle. When the handle is put back in posi-
tion, press it so that the catches click back
into the locked position.
Clips on the panel
4. Remove the three outermost clips on the
panel on the inside of the trunk lid on the
driver's side.
The rectangular section of the clip points toward the
front and rear of the vehicle
5. To remove a clip: insert a flat object (kitchen
knife, screwdriver, etc.) on the sides of the
clip so that both catches are pressed in at
the same time. Pry or pull out the clip.
The hinge's plastic cover is held in place by a plastic clip
and three snaps
6. To remove the plastic hinge's plastic cover,
depress the pin in the plastic clip with a
screwdriver or similar object and pry out the
clip.
7. Release the three snaps in the plastic cover
with a small screwdriver and remove the
cover.
8. Carefully pull out the section of the panel
that has been released to access the bulb.
Loading ...
Loading ...
Loading ...