Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
}}
135
engine is started or the ignition is in mode II,
regardless of the ambient lighting conditions.
Related information
•
Daytime Running Lights (DRL) (p. 137)
•
Ignition modes (p. 354)
High and low beam headlights
If the ignition is in mode II or when the engine is
started, the low beams are activated automati-
cally if the lighting ring is in position
. In
dark conditions, the low beams will also be on if
the lighting ring is in the
position.
Lighting ring
High beam flash
Continuous high beams
High beam flash
Pull the lever slightly toward the steering wheel.
The high beams illuminate until the lever is
released.
Continuous high beams
Continuous high beams are available if the light-
ing ring is turned to
4
or
. Toggle to
high beams by moving the lever forward. Return
to low beams by moving the lever toward the
steering wheel.
The
symbol will illuminate in the instrument
panel when the high beams are on.
Active high beams
The active high beam system uses a camera at
the upper edge of the windshield to detect the
headlights of oncoming vehicles or the taillights
of a vehicle directly ahead. When this happens,
the headlights will automatically switch from high
beams to low beams.
When the camera no longer detects an
approaching vehicle or one that is ahead, your
headlights will switch back to high beams.
Vehicles with halogen headlights
5
When the camera no longer detects the head-
lights of an approaching vehicle or the taillights
of a vehicle ahead, your headlights will switch
back to high beams after several seconds.
4
When the low beams are on.
5
Halogen headlights are not available on all models.
Loading ...
Loading ...
Loading ...