Loading ...
Loading ...
Loading ...
Components Guide
45
The indicators on the back of the camera light or blink under the
following conditions.
Right Indicator
Left Indicator
This camera is equipped with a power saving function. The power will
shut off in the following circumstances. Press the power button again to
restore power.
* This time can be changed.
Indicators
Green: Ready to shoot (camera beeps twice)
Blinking Green: Time Lapse (movie) recording/Image recording/
reading/erasing/transferring (when connected to a
computer/printer)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
Yellow: Macro mode/infinity mode/AF lock mode
Blinking Yellow: Focusing difficulty (camera beeps once)
Never do the following while the indicator blinks green. These
actions may corrupt image data.
- Shake or jolt the camera
-
Turn off the camera,
or open the memory card slot/battery
cover
Power Saving Function
Shooting Mode Powers down approximately 3 minutes after the
last control is accessed on the camera. The LCD
monitor automatically turns off 1 minute* after the
last control is accessed even if [Auto Power Down]
is set to [Off]. Press any button other than the
power button or change the camera orientation to
turn the LCD monitor back on.
Playback Mode
Connected to a Printer
Powers down approximately 5 minutes after the
last control is accessed on the camera.
z The power saving function will not activate during a slide
show or while the camera is connected to a computer.
z The power saving function settings can be changed (p. 51).
Loading ...
Loading ...
Loading ...