Loading ...
Loading ...
Loading ...
Troubleshooting
192
Subject in recorded image is too bright, or image
flashes white.
Subject is too close, making
the flash too strong.
z Shoot with the subject within the
correct flash range when using the
built-in flash (p. 215).
The subject is overexposed
because the surroundings
are too dark.
z Set the exposure compensation to a
negative (–) setting (p. 107).
z Use the AE Lock or spot metering
functions (pp. 102, 108).
Too much light is shining
directly into the camera, or
is being reflected off the
subject.
z Change the shooting angle.
Flash is set to on. z Set the flash to (Flash off) (p. 71).
Image contains noise.
ISO speed is too high. z Higher ISO speeds and (High ISO
Auto) setting may increase image
noise. For higher image quality, use
as low an ISO speed as possible
(p. 104).
z In , , , , , , and
modes, as well as when using the
Auto ISO Shift, the ISO speed
increases and noise can appear.
White dots appear on the image.
Light from the flash has
reflected off dust particles or
insects in the air. This is
particularly noticeable when
shooting using the wide
angle.
z This is a phenomenon that occurs
with digital cameras and does not
constitute a malfunction.
Loading ...
Loading ...
Loading ...