Loading ...
Loading ...
Loading ...
45
5 Maintenance
E If you want to change the filter at a later point in time, turn the
Rotary Switch until
START NO is displayed. Exit the mainte-
nance programme by pressing the Rotary Switch. The prompt
‘Change filter’ remains on the display.
c T Press the maintenance button.
CHANGE FILTER / PRESS RINSE
T Remove the water tank and empty it.
T Lift the cartridge holder.
T Take out the old CLARIS filter cartridge and the extension.
T Fit the extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the cartridge holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert.
T Place a receptacle (at least 500 ml) under the frother.
E If you are using the Professional Cappuccino Frother, set the
selection lever of the frother to the steam position n.
c T Press the maintenance button.
FILTER RINSING, water flows out of the frother.
E You can interrupt filter rinsing at any time. To do this, press
any button.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Filter rinsing stops automatically after approx. 500 ml. The
IMPRESSA heats up and is once again ready to use.
You can initiate the ‘Changing the filter’ operation manually.
Precondition: The filter is activated and
COFFEE READY is
shown on the display.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
MAINTENANCE
appears.
Manual filter change
Loading ...
Loading ...
Loading ...