Loading ...
Loading ...
Loading ...
38
5 Maintenance
When the IMPRESSA is switched off, a rinse operation is automati-
cally initiated.
You can initiate the rinse operation manually at any time.
Precondition:
COFFEE READY is displayed.
T Place a receptacle under the coffee spout.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
MAINTENANCE
appears.
k T Press the Rotary Switch to enter the programme item.
CLEAN CAPPUCCINO
f T Turn the Rotary Switch until RINSE MACHINE is dis-
played.
k T Press the Rotary Switch to initiate the rinse operation.
MACHINE RINSING
Rinsing stops automatically and your IMPRESSA is then once
more ready for use.
E This chapter applies to the Professional and Easy Cappuccino
Frothers.
Each time milk has been prepared the IMPRESSA displays a prompt
for Cappuccino rinsing.
It can be set in programming mode whether the rinsing prompt is
displayed immediately or 10 minutes after preparation (refer to
Chapter 4 ‘Permanent settings in programming mode – Rinses’).
Precondition:
COFFEE READY / RINSE CAPPUCCINO is
displayed and the maintenance button c lights up.
T Place a receptacle under the frother.
E If you are using the Professional Cappuccino Frother, turn
the selection lever to the steam position n.
c T Press the maintenance button.
CAPPU. RINSING, the frother is rinsed.
The procedure stops automatically.
COFFEE READY
appears on the display.
Rinsing the cappuccino
frother
Rinsing following a prompt
Loading ...
Loading ...
Loading ...