Loading ...
Loading ...
Loading ...
43
5 Maintenance
T Remove the water tank and empty it.
T Completely dissolve the contents of one blister (3 JURA des-
caling tablets) in a container that holds 600 ml of water. This
may take several minutes.
T Pour the solution into the empty water tank and insert it in
the machine.
SOLVENT IN TANK / PRESS RINSE, the mainte-
nance button c lights up.
T Remove the frother from the Connector System
©
.
T Place a receptacle under the hot water spout and another
under the Connector System
©
.
c T Press the maintenance button.
DECALCS, water flows out of the Connector System
©
and
the hot water spout. The maintenance button c flashes
during the descaling operation.
E You can follow the current status of descaling on the progress
bar.
The process is interrupted,
EMPTY TRAY.
T Empty the receptacles below the hot water spout and the
Connector System
©
.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
RINSE WATER TANK / FILL WATER TANK
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert.
PRESS RINSE, the maintenance button c lights up.
T Refit the frother.
T Place a receptacle under the coffee and hot water spout and
another under the frother.
c T Press the maintenance button.
DECALCS, water flows out of the frother and the hot water
spout.
The process is interrupted,
HEATING UP.
MACHINE RINSING, water flows out of the coffee
spout. The operation stops automatically,
EMPTY TRAY.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Loading ...
Loading ...
Loading ...