Loading ...
Loading ...
Loading ...
Troubleshooting
Common
Symptom Cause Action (Refer-
ence page)
The power
will not turn
on.
The unit will
not operate.
Leads and con-
nectors are in-
correctly con-
nected.
Confirm once
more that all con-
nections are cor-
rect.
The fuse is
blown.
Rectify the cause
and then replace
the fuse. Be sure
to install a fuse
with the same rat-
ing.
Noise and/or
other factors
are causing the
built-in micro-
processor to op-
erate incor-
rectly.
Press RESET.
(Page 44)
Operation
with the re-
mote control
is not possi-
ble.
The unit does
not operate
correctly even
when the ap-
propriate re-
mote control
buttons are
pressed.
Battery power is
low.
Load a new bat-
tery.
Some opera-
tions are prohib-
ited with certain
discs.
Try operating with
another disc.
Symptom Cause Action (Refer-
ence page)
Playback is
not possible.
The disc is dirty. Clean the disc.
The type of disc
loaded cannot
be played on
this unit.
Check the disc
type.
The disc loaded
is not compati-
ble with this
video system.
Change the disc
to one that is
compatible with
your video sys-
tem.
There is no
sound.
The volume
level will not
rise.
Cables are not
connected cor-
rectly.
Connect the ca-
bles correctly.
The unit is per-
forming still,
slow motion or
frame-by-frame
playback.
There is no sound
during still, slow
motion or frame-
by-frame play-
back.
There is no
image dis-
played.
The parking
brake cable is
not connected.
Connect the park-
ing brake cable,
and apply the
parking brake.
The parking
brake is not ap-
plied.
Connect the park-
ing brake cable,
and apply the
parking brake.
The
icon is
displayed,
and operation
is not possi-
ble.
The operation is
prohibited for
the disc.
This operation is
not possible.
The operation is
not compatible
with the config-
uration of the
disc.
This operation is
not possible.
Symptom Cause Action (Refer-
ence page)
The image
displayed
stops
(pauses) and
the unit can-
not be oper-
ated.
The data could
no longer be
read during
playback.
Stop playback
once, and start
playback again.
There is no
sound.
The volume
level is low.
The volume
level is low.
Adjust the volume
level.
The attenuator
is on.
Turn the attenua-
tor off.
The sound
and video
skip.
The unit is not
firmly secured.
Firmly secure the
unit.
File size and
transmission
rate are above
recommended
rates.
Create a DivX file
that is within the
recommended
size and transmis-
sion rate.
The aspect
ratio is incor-
rect and the
image is
stretched.
The aspect ratio
setting is incor-
rect for the dis-
play.
Select the appro-
priate setting for
your display.
(Page 36)
The motor
sounds when
the ignition
switch is
turned ON (or
is turned to
ACC).
The unit is con-
firming whether
or not a disc is
loaded.
This is a normal
operation.
Symptom Cause Action (Refer-
ence page)
Nothing is
displayed.
The touch
panel keys
cannot be
used.
The rear view
camera is not
connected.
Connect a rear
view camera.
Camera Polar-
ity is at incor-
rect setting.
Press the home
button to return
to the source dis-
play and then se-
lect the correct
setting for Cam-
era Polarity.
(Page 40)
No xxxx ap-
pears when a
display is
changed (No
Title, for ex-
ample).
There is no em-
bedded text in-
formation.
Switch the display
or play another
track/file.
Subfolders
cannot be
played back.
Folder repeat
play has been
selected.
Select the repeat
range again.
The repeat
range
changes auto-
matically.
Another folder
was selected
during repeat
play.
Select the repeat
range again.
Track search or
fast forward/re-
verse was per-
formed during
file repeat play.
Select the repeat
range again.
English
Additional information
51
Appendix
Additional information
En
<CRD4703-B/N>51
Loading ...
Loading ...
Loading ...