Loading ...
Loading ...
Loading ...
5-5
Part Name Descriptive Picture How To Do
Heater
1. Unplug the unit.
2. Knock the unit down to Front Panel (included).
3. Remove the wire connectors.
4. Remove the nut (10mm) in the center and take
out Heater.
Motor
1. Unplug the unit.
2. After removing screws(2ea) on Back Cover,
take out Back Cover by sliding it up.
4. Rotate Motor Cover to locate a slot in Stator.
Insert a Phillips screwdriver into the slot to lock
Stator.
5. Remove the nut (19mm).
6. Grab Motor Cover at 3 and 9 o’clock and pull
it out.
7. Remove the bolts (6ea, 10mm) securing
Stator Coil to Tub.
8. Remove the wire connectors.
Drain Pump
1. Unplug the unit.
2. Remove Back Cover.
3. Remove the wire connector.
4. Remove Clamp and Drain Hose.
5. Remove Clamp and Pump Hose.
6. Remove the bolts (3ea, 13mm) securing Drain
Pump to Cabinet Bottom.
7. Remove the screw securing
Drain Pump to the support bracket.
Twist Drain Pump clockwise to
remove.
* Make sure to put an empty container under
Drain Pump to hold water inside.
5-2. DISASSEMBLY
Loading ...
Loading ...
Loading ...