Loading ...
Loading ...
Loading ...
28 Rev 0.0
USER INSTRUCTIONS
EN
8.1 Using the water softening system
The amount of scale contained in the water (water hardness index) can cause
whitish staining on the dry dishes, which tend to become dull over time. The
dishwasher is equipped with an automatic softening system which uses a spe-
cial regenerating salt to reduce the hardness of the water. The dishwasher is
factory set for water hardness level 3 (average hardness 41-60°dF – 24-31°dH
/ 23.6-35 gpg). When using water of medium hardness, the regenerating salt
container should be refi lled after approximately 20 washing cycles. The salt
container can hold approximately 1.7 Kg (3.75 lb) of salt in grains. Some mod-
els are equipped with an optical no-salt indicator. In these models, the cap of
the salt container contains a green fl oat which descends as the salt concen-
tration in the water drops. When the green fl oat can no longer be seen, the
container must be topped up with regenerating salt. The container is situated
at the bottom of the dishwasher. After removing the lower rack, unscrew the
salt container cap (ref. A fi g. 8-01) by turning it counter clockwise and pour in
the salt using the funnel (ref. A fi g. 8-02) supplied with the dishwasher. Before
replacing the cap (ref. A fi g. 8-01), remove any salt residues from around the
opening.
A
Fig. 8-01
Loading ...
Loading ...
Loading ...