Loading ...
Loading ...
Loading ...
Rev 0.0 17
USER INSTRUCTIONS
EN
3 .2.6 Canceling the current program
To cancel the current program, open the door and press and hold down •
the program selection button (ref. 3 fi g. 3-02) for a few seconds until the
indicator lights of the fourth and fi fth programs turn on (ref. pr. 4, pr. 5 fi g.
3-03).
Close the door again.•
After about 1 minute, the dishwasher terminates the cycle and the indica-•
tor lights of the fourth and fi fth programs (ref. pr. 4, pr. 5 fi g. 3-03) start
fl ashing.
pr. 4
pr. 5
AUTO
3.2.7 Options
HALF-LOAD
This option is particularly suitable for reduced loads and saves on water and
electricity.
Before selecting the half-load wash option, open the dishwasher door and
choose the required washing program (see para 3.2 “Setting the washing pro-
gram and switching it on and off”).
The half-load wash cycle can be selected in two different ways using the half-
load wash button (ref. 9 fi g. 3-02):
press the button • once to select washing in the upper rack. This is confi r-
med by the appropiate indicator light (ref. 10a fi g. 3-02);
press the button • twice to select washing in the lower rack. This is confi r-
med by the appropiate indicator light (ref. 10b fi g. 3-02);
press the button• three times to return to the standard full load condition
(washing in both racks, both indicator lights off).
When washing with just the lower rack is selected, the cutlery basket can
be separated and just half used.
FIG. 3-03
Loading ...
Loading ...
Loading ...