Loading ...
Loading ...
Loading ...
7. Turn the lug nut wrench (attached to the jack handle)
clockwise to raise the vehicle off the ground.
8. Remove the wheel lug nuts with the lug nut wrench.
9. Remove the flat tire and replace it with the spare tire.
10. Place the wheel lug nuts on the spare tire. Use the lug nut
wrench to screw the lug nuts snug against the wheel, but
do not tighten fully.
11. Lower the vehicle by turning the jack handle
counterclockwise.
12. Use the wheel lug wrench to tighten lug nuts in the
appropriate sequence. Re-check for complete tightness.
The lug nuts should be tightened to 72-87 ft-lb (98-118 N•m).
Lug nut tightening sequence
Roadside Emergencies
265
Loading ...
Loading ...
Loading ...