Loading ...
Loading ...
Loading ...
15
English
CARE AND CLEANING TROUBLESHOOTING
Unit has been unplugged
Unknown cause
• Release the Power/Pulse Trigger.
• Check the power supply.
• Restart the Commercial Immersion
Blender as instructed in “Operating
the Commercial Immersion Blender”.
• Release the Power/Pulse Trigger.
• Unplug the unit.
• Wait a few minutes for the motor to cool
down and the thermal safety mechanism
to reset.
• Restart the Commercial Immersion
Blender as instructed in “Operating
the Commercial Immersion Blender”.
Machine has overheated
• Release the Power/Pulse Trigger.
• Unplug the unit.
• Check the following:
- electrical plug for damage.
- power cord for cuts or other damage.
- drive shaft for freedom of rotation.
(check by removing the attachment arm
and rotating the shaft manually).
- blades for freedom of movement.
(food may be lodged between blades
and plastic guard.)
If the Commercial Immersion Blender has stopped working, check
for the following:
IMPORTANT: If a piece of food becomes
lodged in the guard surrounding the blade,
follow these instructions:
1. Release the Power/Pulse Trigger and
unplug the Commercial Immersion
Blender.
2. Use a spatula to remove the food
lodged in the plastic guard. Do not use
yourngerstoremovelodgedfood.
3. Plug the Commercial Immersion
Blender back into the electrical outlet
and resume operation.
W10831307A_ENv13.indd 15 11/23/15 11:26 AM
Loading ...
Loading ...
Loading ...