Loading ...
Loading ...
Loading ...
13
CMD + SHIFT CLICK TO CHANGE COPY
English
OPERATING THE COMMERCIAL IMMERSION BLENDER
TIPS FOR GREAT RESULTS
• Cut solid foods into small pieces for
easier blending or chopping.
• The Commercial Immersion Blender is
equipped with thermal protection from
high operating temperatures. Should
the Commercial Immersion Blender
suddenly stop during use, unplug it and
allow 10 minutes to automatically reset.
• To avoid splashing, insert the Commercial
Immersion Blender into the mixture
before pressing the Power/Pulse Trigger,
and release the Power/Pulse Trigger
before pulling the Commercial Immersion
Blender out of the mixture.
• When blending in a stockpot on a
cooktop, remove the stockpot from
the heating element to protect the
Commercial Immersion Blender
from overheating.
• For best blending, hold the Commercial
Immersion Blender at an angle and gently
move up and down within the container.
Do not pound down on the mixture with
the Commercial Immersion Blender.
• Topreventoverow,allowroominthe
container for the mixture to rise when
using the Commercial Immersion Blender.
• Be sure the extra long cord of the
Commercial Immersion Blender is not
extending over a hot heating element.
• Do not let the Commercial Immersion
Blender sit in a hot pan on the cooktop
while not in use.
• Remove hard items, such as fruit pits
or bones, from the mixture before
blending or chopping to help prevent
damage to the blades.
Using the Bowl Clamp and the Continuous Run feature
OPERATING THE COMMERCIAL IMMERSION BLENDER
1. Slide the notched latch into the Bowl
Clamp at the slot in the top of the
clamp; then, use the adjustment wheel
to tighten into place at the correct spot
for the bowl you are using to mix.
2. Slide the Bowl Clamp over the edge
of the bowl you are using for mixing,
allowing the white notch on the clamp
to snap onto the bowl; then, turn the
knob to tighten in place.
3. Snap the Commercial Immersion
Blender into the slot at the bottom of
the Bowl Clamp support arm, so that
the Commercial Immersion Blender is
inserted in the mixture you are blending.
4. Press the Lock switch to unlock the
Commercial Immersion Blender, then
Press the Power/Pulse Trigger and the
Continuous Run button simultaneously,
and then release the Power/Pulse Trigger
to activate the continuous run feature.
The Commercial Immersion Blender
will run hands-free at this setting.
IMPORTANT: Continuous Run feature
maximum recommended mixing times:
30 minutes - Low Speed
10 minutes - High Speed
W10831307A_ENv13.indd 13 11/23/15 11:26 AM
Loading ...
Loading ...
Loading ...