Loading ...
Loading ...
Loading ...
35(3$5,1*)25,167$//$7,21
,QVWDOODWLRQ,QVWUXFWLRQV
722/6$1'3$5761(('('
• Large flat-blade screwdriver
• Phillips screwdriver
• 3/8” socket and ratchet
• Saw
• Carpenter’s square
• Pipe wrench
• Gas line shut off valve
• Pipe joint sealant for use with gas connections that
resists action of LP gas
)RUIOH[LEOHFRQQHFWLRQZKHUHORFDOFRGHVSHUPLW
• Flexible metal tubing (same 3/4” or 1/2” I.D. as gas
supply line)
• Flare union adapter for connection to supply line
(3/4” NPT x 3/4” I.D. or 1/2” NPT x 1/2” I.D.)
• Flare union adapter for connection to regulator
(1/2” NPT x 3/4” I.D. or 1/2” I.D.)
)RUULJLGFRQQHFWLRQ
• Pipe fittings as required
Tie down
bolt on each
end
Grease Container
Pressure Regulator
Wiring Box Cover
29” ±
1
ø16”
%ORZHUFDQEHVZLYHOHG
9
1
ø2”
8
13
ø16”
22.2 cm
15
ø16”
21” ±
1
ø16”
Minimum
Clearance
Minimum
Clearance
73.66 ± .16 cm
24.13 cm
2.38 cm
9”
22.86 cm
53.5 ± .16 cm
14
3
ø16”
36.04 cm
,03257$17
0RWRU&OHDUDQFH³3URYLGHµPLQFPFDELQHW
clearance to motor for cooling purpose.
127( Where possible, 6” (15.2 cm) is recommended
for motor/blower service.
6LGH&OHDUDQFH³*ULOOVLQVWDOOHGQHDUDVLGHZDOOVKRXOG
allow a minimum clearance of 8” (20.3 cm).
You must allow room enough to remove and empty
grease container(s).
&$87,21 Warranty is void on equipment installed
other than as recommended by GE. Recommended
wall caps and transitions must be used for proper
operation and installation.
20
* Blower may be rotated for horizontal or vertical direction by loosening
nuts around blower inlet. Accessible inside ventilation chamber.
4
3
ø16” 10.64 cm
18
1
ø2”
47 cm
Minimum
Clearance
2”
5.08 cm
Minimum
Clearance
14
1
ø2”
36.83 cm
12
7
ø8”
32.7 cm
Grease
Container
Appliance
Pressure
Regulator
Select appropriate duct
cutout. (See ducting
installation instructions.)
35(3$5$7,21
Loading ...
Loading ...
Loading ...