Loading ...
Loading ...
Loading ...
Operating the appliance en
35
p (Easy iron)
Reduces creasing by means of a
special spin sequence followed by
fluffing and reduced spin speed.
Touch p (Easy iron) and activate or
deactivate it.
Note: If p (Easy iron) has been
activated, the laundry will have retained
a higher than average level of moisture
after spinning.
Z (Water plus)
Increased water level for gentler
treatment of the laundry.
Touch Z (Water plus) to activate or
deactivate it.
â (Memory)
You can save a selected programme
with your favourite settings here.
To store:
1. Switch on the appliance.
2. Select a programme.
3. If required, change the programme
default settings and/or select
programme additional settings.
4. Touch and hold â (Memory) button
for approx. three seconds.
The programme is saved if all of the
settings flash briefly.
Calling up: touch â (Memory) button
briefly after you switch on the appliance.
Reset: touch and hold â (Memory)
button again for approx. three seconds
after selecting the new programme and
settings.
Á (Silent)
Special designed function for noise
reduction. Washing and drying process
noise will be reduced, and ending
signal will be switched off.
Note: If silent is selected for wash only,
remaining moisture of the laundry will
be slightly increased. The spin result
may not be satisfying. Before hanging
you can select Spin programme to
further reduce moisture.
1 Operating the
appliance
Operati ng the appliance
Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum Clean programme.
~ "Before washing for the first time"
on page 20
Notes
■ Never switch on a damaged
appliance!
■ Inform customer service!
1. Insert mains plug.
:Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
Loading ...
Loading ...
Loading ...