Loading ...
Loading ...
Loading ...
Additional programme settings en
33
Finish in
Before starting the programme, you
can preselect the programme end
("Finish in" time) in 0.5h increments (h =
hour) up to a maximum of 24 hours.
To do this:
1. Select a programme (except
MyTime programme).
The programme duration is
displayed for the selected
programme, e.g. 2:30
(hours:minutes).
2. Select the ˜ button repeatedly until
the required number of hours is
displayed.
Note: The setting values are
increased using the ˜ button, and
decreased using the ~ button.
3. Select the A button.
The programme starts.
The selected number of hours (e.g.
8h) is shown in the display panel
and counts down until the
programme starts. The duration of
the programme is then displayed.
Note: The length of the programme is
automatically adjusted when the
programme is running. Changes to the
programme default settings or
programme additional settings may also
change the programme duration.
After starting the programme (if a
“Finish in” time has been selected and
the programme has not yet started), you
can change the preselected number of
hours as follows:
1. Select the A button.
2. Touch the ˜ or ~ button to change
the number of hours.
3. Select the A button.
\ Additional programme
settings
Additi onal programme settings
Note: You can find possible additional
programme settings in the overview;
these differ depending on the model.
By selecting additional programme
settings, you can better adapt the
washing/drying process to your items of
laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not retained after the
appliance is switched off.
Wash+Dry
Continuous cycle with washing and
drying at once.
Dry
Drying cycle without washing.
» (Cupboard dry)
For single-layer fabrics. Garments can
be folded or hung up in a cupboard.
Loading ...
Loading ...
Loading ...