Loading ...
Loading ...
Loading ...
17
Part names and functions
Remote control battery installation
Operation range
Adjustable foot
1. Open the battery
compartment lid.
2. Install new batteries into
the compartment.
3. Re-cover the compartment
lid.
For correct polarity
( + and – ) , be sure
battery terminals are in
contact with pins in the
compartment
To ensure safe operation, please observe the following precautions:
● Use two (2) AAA or LR03 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with a used battery.
● Avoid contacting with water or liquid matter.
● Do not expose the remote control to moisture or heat.
● Do not drop the remote control.
● If the battery has leaked on the remote control, carefully wipe the case clean and
install new batteries.
● Risk of explosion if a battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions.
Point the remote control toward the projector when
pressing any button. The maximum operating
range for the remote control is about 5 meters and
60 degrees.
MENU
AUTO
INPUT
POWER
OK
/
16.4'
(5 m)
30°
Remote control
30°
Adjustable foot
Projection angle can be adjusted up to 10.0
degree with the Adjustable foot.
Lift the fore body of the projector, and press the
Foot adjusting Button on the front foot to release
it.
Rotate the Adjustable foot to adjust the height and
tilt angle.
Keystone distortion of projected image can be
corrected by auto settings or manually remote
control or menu operation.
Loading ...
Loading ...
Loading ...