Loading ...
Loading ...
Loading ...
Restarting the entry/exit function
If the battery cable is disconnected or if the
fuse opens, the stored memory positions
may be lost and some of the functions will
be restricted.
1. Drive the vehicle over 25 mph (40 km/h).
OR
2. Open and close the driver’s door more
than two times with the ignition switch
in the OFF position.
The entry/exit function should now work
properly.
SYSTEM OPERATION
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
∙ When the vehicle speed is above 4 mph
(7 km/h).
∙ When any of the memory switches are
pushed while the automatic drive posi-
tioner is operating.
∙ When the switch for the driver’s seat
and steering column is pushed while
the automatic drive positioner is oper-
ating.
∙ When the seat has already been moved
to the memorized position.
∙ When no seat position is stored in the
memory switch.
∙ When the shift lever is moved from P
(Park) to any other position.
3-40 Pre-driving checks and adjustments
Loading ...
Loading ...
Loading ...