Loading ...
Loading ...
Loading ...
NOTE:
Do not hang any objects over the sen-
sors
䊊
1
or apply glass cleaner to the sen-
sors. Doing so will reduce the sensitivity
of the sensors, resulting in improper op-
eration.
The indicator light
䊊
2
will illuminate when
the automatic anti-glare feature is operat-
ing.
∙ To turn off the anti-glare feature, press
the O button. The indicator light will
turn off.
∙ To turn on the anti-glare feature, press
the | button. The indicator light will turn
on.
For information on HomeLink® Universal
Transceiver operation, refer to the
“HomeLink® Universal Transceiver” in the
“Instruments and controls” section of this
manual.
OUTSIDE MIRRORS
WARNING
∙ Do not adjust the mirrors while driv-
ing. You could lose control of your ve-
hicle and cause an accident.
∙ Objects viewed in the outside mirror
on the passenger side are closer than
they appear. Be careful when moving
to the right. Using only this mirror
could cause an accident. Use the in-
side mirror or glance over your shoul-
der to properly judge distances to
other objects.
Electric control type
The outside mirror remote control will op-
erate only when the ignition switch is in the
ACC or ON position.
Move the small switch
䊊
1
to select the left
or right mirror. Adjust each mirror to the
desired position using the large switch
䊊
2
.
Move the small switch to the center (neu-
tral) position to prevent accidentally mov-
ing the mirror.
LPD2452
3-36 Pre-driving checks and adjustments
Loading ...
Loading ...
Loading ...