Loading ...
Loading ...
Loading ...
AUTOMATIC OPERATION (if so
equipped)
Tilt and telescopic operation
To adjust the steering wheel move the
switch
䊊
1
in the following directions:
∙ Adjust the steering wheel up or down in
direction
䊊
2
to the desired tilt position.
∙ Adjust the steering wheel forward or
backward in direction
䊊
3
to the desired
telescopic position.
CAUTION
For vehicles with automatic drive posi-
tioner: Failure to reset the tilt and tele-
scoping functions of the steering
wheel, after the vehicle’s battery has
been discharged, may prevent the
steering wheel position from being
adjusted.
For vehicles with automatic drive posi-
tioner: Both the tilt and telescopic steering
operation must be reset after the vehicle’s
battery has been discharged in order to
prevent the tilt and telescopic operation
from locking in one position. When the bat-
tery has been recharged or replaced, per-
form the following:
∙ For tilt operation, adjust the switch
䊊
1
so the steering wheel moves to the
highest position
䊊
2
that can be
reached.
∙ For telescopic operation, adjust the
switch
䊊
1
so the steering wheel moves
to the most forward and backward po-
sition
䊊
3
that can be reached.
Performing these operations resets the
range of the steering wheel’s tilt and tele-
scopic function.
Entry/Exit function (if so
equipped)
The automatic drive positioner system (if
so equipped) will make the steering wheel
move up automatically when the driver’s
door is opened and the ignition switch is in
the LOCK position. This lets the driver get
into and out of the seat more easily. The
steering wheel moves back into position
when the driver’s door is closed and the
ignition switch is pushed.
For additional information, refer to “Auto-
matic drive positioner” in this section.
LPD2410
Pre-driving checks and adjustments 3-33
Loading ...
Loading ...
Loading ...