Loading ...
Loading ...
Loading ...
15
If you have any questions or if afault
occurs, please call Customer Service.
(See list of Customer Service
representatives).
When you call, please quote the following:
Enter the relevant numbers into the box
above. The E-Nr.(product no.) and FD
(pr
oduction date) areshown on the
nameplate which can be seen inside the
extractor hood after the filter frame has
been detached.
E-Nr.FD
If you encounter aproblem
Old appliances arenot worthless
rubbish. Valuable raw materials can be
re
claimed by recycling old appliances.
Beforedisposing of your old appliance, ren-
der it unusable.
Youreceived your new appliance in a
protective shipping carton. All packaging
materials areenvironmentally friendly and
re
cyclable. Please contribute to abetter
environment by disposing of packaging
materials in an environmentally-friendly
manner.
Please ask your dealer or inquireatyour
local authority about current means of
disposal.
The
extractor hood can be used in
exhaust air or circulating air mode.
Always mount the extractor hood over
the centreofthe hob.
Minimum distance between electric hob
and bottom edge of extractor hood:
650 mm.
The extractor hood must not be
installed over asolid fuel cooker –a
potential firehazard(e.g. flying sparks) –
unless the cooker features a closed,
non-removable cover and all national
regulations areobserved.
The smaller the gap between the
extractor hood and hotplates, the greater
the likelihood that droplets will form on the
underside of the extractor hood.
Additional information concerning gas
cookers:
When installinggas hotplates, comply
with the relevant national statutory
re
gulations (e.g. in Germany: Technische
Regeln Gasinstallation TRGI).
Always comply with the currently valid
regulations and installation instructions sup-
plied by the gas appliance
manufacturer.
Only one side of the extractor hood may
be installed next to ahigh-sided unit or high
wall. Gap at least 50 mm.
Minimum distance on gas hotplates
between the upper edge of the trivet
and lower edge of the extractor
hood:
650 mm.
min 650
Installation Instructions:
Important information
Loading ...
Loading ...
Loading ...