Loading ...
Loading ...
Loading ...
Various types of grease filter can be
used to absorb the grease contained in
the vapours produced during cooking.
Fleece grease filter
The filter mat is made from material that is
itself
virtually non-inflammable.
Caution:
As it becomes moreand moresaturated
with grease however,the filter becomes
incr
easingly inflammable. The efficiency of
the extractor hood can also be adversely
affected.
Important:
Renewing the fleece filter at appropriate
intervals prevents the possibility of it
catching
fireasaresult of abuild-up of
heat, such as occurs when deep-fat frying
or roasting is taking place.
Renewing the fleece filter:
❑
Under normal operating conditions
(1 to 2hours per day), the fleece filter
will requirereplacing after 8to10
weeks. Printed fleece filters must be
renewed no later than when the colou-
redprinting has started to fade.
❑
Use only original replacement filters.
In so doing you will ensurethat safety
regulations areupheld and the extractor
hood performs as effectivelyaspossi-
ble.
Disposing of the old fleece grease filter:
Fleece grease filters do not contain any
pollutants. They can be composted and
disposed of as biodegradable waste.
Metal grease filter
The filter mat is made of non-combustible
metal.
Caution:
As it becomes moreand moresaturated
with grease, the filter also becomes
increasingly inflammable. The efficiency of
the extractor hood can also be adversely
affected.
Important:
Clean the metal grease filter at regular
intervals.
Cleaning the metal filter:
Under normal operating conditions (1 to 2
hours per day), the metal grease filter will
requirecleaning after 8to10weeks.
❑
The filter can be cleaned in a
dishwasher.
This can however cause slight
discoloration.
Filters and maintenance
12
Extractor hoods with two filter cartridges:
Wa
rning: The halogen bulbs must be swit-
ched offand cool.
1. Depress the detent on the grease filters
in the direction of the arrow and fold
down the grease filter slightly.Detach
the grease filter by pulling it towards
yourself.
2. Clean the grease filters.
3. Re-insert the clean grease filters.
Important:
Metal filters that areheavily saturated with
grease should not be cleaned at the same
time as any crockery,etc.
❑
If the filter mat is going to be cleaned by
hand, soak it first of all in ahot deter-
gent solution for several hours.
Clean the filter with abrush, rinse it off
thoroughly and allow it to drip dry.
❑
Use only original replacement filters.
In so doing you will be ensuring that the
extractor hood performs as effectively
as possible.
Removing
and installing the grease
filter
Extractor hoods with afilter mat:
1. Rotate the handles on the left and right
of the filter grille.
2. Press the retaining spring and remove
the filter frame.
3. Remove the wiregrille and replace the
filter mat.
4.Install the filter frame in reverse sequence.
Re-attach the retaining spring.
The left and right sides of the filter
frame must lock into position!
Loading ...
Loading ...
Loading ...