Loading ...
Loading ...
Loading ...
Cleaning and care
Changing the bulbs
1. Switch offthe extractor hood and isolate
by
pulling out the mains plug or swit-
ching offthe disconnector on the instal-
lation side.
2. Remove the filter frame.
❑
See grease filter.
3. Replace the bulb (standardfilament
bulb, max 40 W, E14 bulb holder).
4. Attach the filter frame.
❑ See grease filter.
Halogen bulbs:
1.
Switch offthe extractor hood and isolate
by pulling out the mains plug or swit-
ching offthe disconnector on the instal-
lation side.
When switched on, the halogen
bulbs become very hot. Even for some
time after the bulbs have been switched
offthereisstill arisk of burns.
2. Remove the bulb ring with ascrewdriver
or similar tool.
3. Replace the halogen light bulb
(conventional halogen bulb, 12 Volt,
max. 20 Watt, G4 cap).
Caution: Refer to for plug-in
lampholder.
Take hold of the bulb with aclean cloth.
4. Re-insert the bulb ring.
5. Plug the appliance into the mains or
switch it on at the fuse box.
Note: Ifthe light does not function, check
that the bulbs have been inserted correctly.
14
Switch offthe extractor hood and isola-
te by pulling out the mains plug or swit-
ching offthe disconnectoronthe instal-
lation side.
❑
At the same time as you renew the
grease filter (see Filters and
maintenance), clean offany grease from
all
accessible parts of the housing.
This significantly reduces the firehazard
and ensures that the extractor hood
performs as effectively as possible.
❑ Clean the extractor hood with ahot
detergent solution or amild window
cleaning agent.
❑
If the hood is extremely dirty (older
stains), use aliquid window cleaner.
❑
Do not scratch offdried-on dirt, but
wipe offwith adamp cloth.
❑ Do not use scouring agents.
Warning: Clean the control buttons with a
mild detergent solution and asoft, damp
cloth only.
Painted, aluminium and plastic surfaces:
❑ Do not use scouring agents or abrasive
sponges.
❑ Do not use dry cloths.
❑ Do not use corrosive, acidic or alkaline
cleaning agents.
❑
Note: Do not use alcohol (spirit) on
plastic parts, otherwise the surface may
become matt in appearance.
❑
Caution! Ensurethat the kitchen is ade-
quately ventilated. Avoid naked flames.
Loading ...
Loading ...
Loading ...