Loading ...
Loading ...
Loading ...
DISPLAY
Sensitive touches
Your ceramic cooktop is equipped with electronic controls with sensitive touch keys. When your finger
touches the key, the corresponding command is activated. This activation is validated by a control light,
a letter or a number in the display and/or a “beep” sound.
Touch only one key at
a time.
Display
0
1...9
A
E
H
L
Designation
Zero
Power level
Heat accelerator
Error message
Residual heat
Locking
Function
The heating zone is activated
Selection of the cooking level
Automatic cooking
Electronic failure
The heating zone is hot
The control panel is locked
Residual heat indication
After the switch-off of the cooktop, the heating zone is still hot and indicates [ H ] on the display. The
symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on, don’t
touch the heating zone and don’t put any heat sensitive
object on them. There are risks of burn and fire.
STARTING UP THE APPLIANCE
Before using your new cooktop
Clean your cooktop with a damp cloth, and then dry the surface thoroughly. Do not use detergent which
risks causing blue-tinted colour on the glass surface.
Starting-up
If no action is made within 20 second the electronics returns to standby mode.
To start the cooktop, press the On/Off Key, this will cause all displays to show "0". To stop or
turn off the cooktop, press the On/Off Key. The displays will either show nothing, or "H" if the
cooking zone is still hot.
To set a cooking setting for a cooking zone, hold down the Plus Key for the cooking zone you
wish to use.
Once the power display for that zone is illuminated, increase the cooking zone setting by pressing
the Plus Key (1-9), or decrease the cooking zone setting by pressing the Minus Key (9-1).
To stop a cooking zone, hold down the Plus Key for the cooking zone you wish to stop, then
repress the Plus Key while pressing the Minus Key at the same time.
5
Loading ...
Loading ...
Loading ...