Loading ...
Loading ...
Loading ...
INSTALLATION OF BUILT IN COOKTOP
In order to prevent leakage of any liquids on the work bench and fix the cooktop to the bench, a special
sealing tape is supplied together with your oven. Place the cooktop glass down on a clean cloth on a
stable flat surface & apply this seal around the bottom edge of the cooktop (see below). Rem
ove the
backing from the sealing tape and then place the cooktop in position. If the sealing tape is not enough to
fully seal the cooktop to the bench, use a small bead of clear high temperature resistant silicone sealant.
This cooktop can be installed into a workbench 30-40mm thick. When cutting the hole in the work
bench, keep in mind the correct space and ventilation which are shown in the diagrams below.
A board must be placed a minimum of 20mm
below the cooktop that prevents anyone from
touching the underside of the cooktop. Take care
that there is adequate ventilation for air exchange
to the inductive elements (at least 20mm).
NOTE: INDUCTIVE COOKTOPS GENERATE A
LOT OF HEAT INTERNALLY WHEN IN
OPERATION. THE BOTTOM OF THE COOKTOP
MUST HAVE A CLEAR PATHWAY TO VENT
THIS HEAT OUT VIA THE BOTTOM FANS TO
THE OPEN AIR IN ORDER TO KEEP ITSELF
COOL. FAILING TO PROVIDE ADIQUATE
VENTILLATION WILL DAMAGE THE COOKTOP
AND VOID YOUR WARRANTY. THE ABOVE
DIMENSIONS SHOULD BE CONSIDERED THE
MINIMUM VENTILLATION REQUIRED.
4
Loading ...
Loading ...
Loading ...