POWERSHOT-ELPH-180-IS User Manual

Loading ...

BeforeUse

BasicGuide

AdvancedGuide

CameraBasics

AutoMode

OtherShooting

Modes

PMode

PlaybackMode

SettingMenu

Accessories

Appendix

Index

• Focusing may not be possible in some shooting conditions.

• In low-light conditions, Servo AF may not be activated (AF frames

may not turn blue) when you press the shutter button halfway. In this

case,thefocusandexposurearesetaccordingtothespeciedAF

frame mode.

• If optimum exposure cannot be obtained, the shutter speed and

aperture value are displayed in orange. Release the shutter button,

and then press it halfway again.

• [AF-Point Zoom] on the [ ] tab (=

22) is not available.

• Not available when using the self-timer (=

31).

Still Images

Magnifying the Area in Focus

You can check the focus by pressing the shutter button halfway, which will

enlarge the portion of the image in focus in the AF frame.

1 Congurethesetting.

 Press the [ ] button, choose

[AF-Point Zoom] on the [

] tab, and

then choose [On] (=

22).

2 Checkthefocus.

 In [Face AiAF] AF mode, the face

detectedasthemainsubjectismagnied

when the shutter button is pressed

halfway. In [Center] AF mode, the AF

frameinthecenterismagnied.

• Theareainfocusisnotmagniedinthefollowingcaseswhentheshutter

button is pressed halfway.

- [Face AiAF]: When a face was not detected, or when the person is too close

to the camera and their face is too large for the screen

- [Center]: When the camera cannot focus on the subject

- [TrackingAF]:Notmagniedinthismode

- When digital zoom is used (=

29)

Loading ...

User Manual - Page 50