Loading ...
Loading ...
Loading ...
5-19
5-19
Frame servicing
(1) PRE-LOAD LENGTH
(2) ADJUSTER
(3) LOCK NUT
Adjust the spring pre-load length (page 2-5).
Hold the spring adjuster and tighten the lock nut to the
specified torque.
Torque:
(2ED/4ED): 49 N•m (5.0 kgf•m, 36 lbf•ft)
(ED/3ED): Tightening angle 50°±10 after contact
between nuts
(1) SPRING
(2) SPRING SEAT
(3) STOPPER RING
(4) COMPRESSOR
Assembly
Assembly is in the reverse order of disassembly.
Spherical Bearing Replacement
Remove the collars and dust seals.
Check the spherical bearing for smooth rotation or
damage.
Remove the stop ring (2ED/4ED)
Press the spherical bearing out using the special tool.
Tool:
Spherical bearing driver 07HMF-KS60100
Press a new spherical bearing into the shock absorber
pivot until its seats using same tool.
Install the new stop ring into the groove (2ED/4ED).
Apply grease to the dust seal lips.
Install the dust seals and collars.
(1) DUST SEALS
(2) STOP RING (2ED/4ED)
(3) SPHERICAL BEARING
2ED/4ED
2ED/4ED
4
3
2
1
2
23
1
2ED/4ED
2ED/4ED
ED/3ED
ED/3ED
3
2
1
1
1
1
1
1
1
1
1
3
3
3
3
2
2
2ED/4ED
2ED/4ED
ED/3ED
ED/3ED
Loading ...
Loading ...
Loading ...