Loading ...
Loading ...
Loading ...
Operating the appliance en
19
Notes
■ The programme continues by
pumping out the water and spinning
the laundry (the standard spin speed
can be changed beforehand).
■ If only the water is to be pumped out,
press the Start/Reload
A button
again when the spin cycle starts. The
programme is interrupted and the
door lock is released. The laundry
can be removed.
■ If hot flashes in the display before
the drying programme ends, the
temperature in the drum is high. The
programme for cooling the drum
runs until the temperature in the
drum has dropped.
After washing/drying
1. Open the door and remove the
laundry.
2. Turn the programme selector to
Ú Off. The appliance is switched off.
3. Turn off the tap.
Not required for Aqua-Stop models.
~ Page 37
Notes
■ Do not leave any items of laundry in
the drum. In the next wash they may
shrink or discolour another item.
■ Remove any foreign objects from
the drum and the rubber seal – risk
of rust.
■ Leave the detergent drawer and
door open so that residual water can
evaporate.
■ Always remove the laundry.
■ Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for the unlocking device.
■ When the display panel has gone
out at the end of the programme,
energy-saving mode is active. To
activate, select any button.
Loading ...
Loading ...
Loading ...