Loading ...
Loading ...
Loading ...
User Manual Page 5
Safety
Precautions
WARNING - For your safety
• Do not store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance.
• Avoid re hazard or electric shock. Do not use
an extension cord or an adaptor plug. Do not
remove any prongs from the power cord.
WARNING - Prevent Accidents
To reduce the risk of re, electrical shock,
or injury to persons when using your air
conditioner, follow basic precautions,
including the following:
• If the air conditioner is to be installed
in a window, you should clean both
sides of the glass first. If the window is
a triple-track type with a screen panel
included, remove the screen completely
before installation.
• Be sure the air conditioner has been
securely and correctly installed
according to the installation instructions
in this manual. Save this manual for
possible future use in removing or
installing this unit.
The complete electrical rating of your new
room air conditioner is stated on the rating
label. Refer to the rating when checking the
electrical requirements.
• Be sure the air conditioner is properly
grounded. To minimize shock and fire
hazards, proper grounding is important.
The power cord is equipped with a three-
prong grounding plug for protection
against shock hazards.
• Your air conditioner must be used in a
properly grounded wall receptacle. If the
wall receptacle you intend to use is not
adequately grounded or protected by a
time delay fuse or circuit breaker, have
a quali ed electrician install the proper
receptacle.
• Ensure the receptacle is accessible after
the unit installation.
• Do not run air conditioner without
outside protective cover in place. This
could result in mechanical damage within
the air conditioner.
WARNING - Electrical Information
NOTE
The power supply cord with this air conditioner
contains a current detection device designed to
reduce the risk of fire.
Please refer to the section Power Cord
Operation for details.
In the event that the power supply cord is
damaged, it can not be repaired. It must be
replaced with a cord from the manufacturer.
Grounding type wall receptacle
Do not, under any
circumstances, cut,
remove or bypass
the grounding prong.
Power supply cord with 3-prong grounding
plug and current detection device.
RAC-WK1511ESCRU (15,000 BTU) Plug
Do not, under any
circumstances, cut,
remove or bypass
the grounding prong.
Power supply cord with 3-prong grounding
plug and current detection device.
RAC-WK1821ESCRU (18,000 BTU) Plug
Grounding type wall receptacle
Loading ...
Loading ...
Loading ...