Loading ...
Loading ...
Loading ...
Page 24 User Manual
Handling the Remote Controller
Installing the Battery
REMOTE CONTROL INSTRUCTIONS
Location of the remote controller
• Use the remote controller within a distance of 16.4 ft (5 meters)
from the air conditioner, pointing it towards the receiver.
Reception is con rmed by a beep.
• The air conditioner will not operate if curtains, doors or other
materials block the signals from the remote controller to the unit.
• Prevent any liquid from spilling onto the remote controller. Do
not expose the remote controller to direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is exposed
to direct sunlight, the air conditioner may not function
properly. Use curtains to prevent the sunlight from falling on
the receiver.
• If other electrical appliances react to the remote controller,
either move these appliances or consult your local dealer.
CAUTIONS
Step 1: Insert a coin vertically in the groove
on the battery cover, and turn 45º clockwise,
making sure that the groove is aligned with the
“unlock” sign as shown below and remove the
battery cover.
Step 3: Replace the battery cover, making sure the
battery cover groove is aligned with the “unlock”
sign. Insert a coin vertically in the groove and press
it gently, then rotate 45º counter clockwise, making
sure the groove is aligned with the “lock” sign as
shown below.
Step 2: Install battery inside the remote controller,
the positive (+) side up.
Coin
Battery
cover
Battery
cover
Groove
Lock
sign
Unlock
sign
Unlock
sign
Groove
Lock sign
Coin
Battery
Positive (+) side up
Coin
Groove
Battery cover
Unlock sign
Lock sign
Coin
Groove
Battery cover
Unlock sign
Lock sign
WARNING
1. Battery must be disposed of properly. Do
not short circuit or dispose of in a re.
2. Keep batteries out of the reach of children.
3. Do not ingest.
4. Non-rechargeable batteries are not to be
recharged.
5. Exhausted batteries are to be removed
from the product.
Operating
Instructions
(With Remote)
5m
16.4 ft (5 meters)
Loading ...
Loading ...
Loading ...