Loading ...
Loading ...
Loading ...
All specifications are subject to change without prior notification
Installation: Salamander Mount without Shelf
1. Each gas appliance shall be located with respect to building construction and other equipment so as to permit
access to the appliance. Such access and clearance is necessary for service and cleaning.
2. A weld wall mount Salamander and shelf assembly, which includes two (2) hi-hat supports and a left and
right wall mount bracket.
3. One bottom panel, (4) sheet metal screws and (4) plug buttons.
4. Holes required for mounting and hardware for mounting not provided and required by others.
5. Once the wall mount bracket assembly is in place it is required to support a minimum of 200 lbs.
6. Before sliding the Salamander in place remove the second screw back from the front top piece from both the
left and right side of the Salamander. Connect the gas supply and check for gas leaks. DO NOT USE AN
OPEN FLAME.
7. Plug in electrical cord.
8. Slide Salamander to the rear of the assembly until the front of the unit is flush with the wall mount brackets.
Re-install the (2) screws removed from step 7.
9. With the (4) ¼ - 20 bolts provided, secure the Salamander to the bottom flanges of the left and right wall
mount brackets.
10. Secure the bottom panel with (4) sheet metal screws provided and plug the ½ diameter holes with the (4)
plug buttons. Assembly is complete.
WARNING: NEVER USE THIS APPLIANCE AS A SPACE HEATER TO HEAT OR
WARM THE ROOM. DOING SO MAY RESULT IN CARBON MONOXIDE
POISONING AND OVERHEATING OF THE OVEN.
Loading ...
Loading ...
Loading ...