Loading ...
Loading ...
iNSTALLATiON
Gather the recommended took and parts before starting
installation. Read and follow the instructions provided with any
took listed here.
All Installations
Tools Needed:
i F,at:b,ade
e s I screwdriver
5 " i "
_6 and V4 /_) J
nut dr!vers or _S-" JSmal!level
hex sockets __.._.._.._/ _
10', adjustab!e wrench _ 'TorX ®_T20® and, if
that opensto _ installing custom _
!'/8" (2 9 Cm)_ fr°nt.pane/s,
Torx_ T15 screwarivers
Other Useful Items You May Need:
F,ashlight__ Ba
Pa#s Suppffed:
Drain h0se Drain hose #10 X underc0unter Door
clamps (2)Phillips, mounting handle(on
(1 large/red head brackets (2) 5ome
and I smallJ __ screws (2) _m°dels)-
;Ireen) . .
Make sure all these parts are included in the literature package.
If parts are not included, call 1-800-422-1230. In Canada, call
1-800-807-6777
REQUIREMENTS
Other Parts Needed: (not provided)
I i
%" Compression Household Wiring Twist-on Wire
x 3/4 Hose Fitting (Metallic) Strain Relief Connectors
with rubber seal to fit %" (2.2 cm) hole NOTE: Confirm
and 90°elbow (required to properly proper size for
(required to secure household connecting your
properly connect wiring to the dish- gauge of house-
household water washer terminal box) hold wiring to the
line to the NOTE: Use only UL .16-gauge wiring
dishwasher)
(Part Number
W!0685193)
Listed/CSAApproved in the dishwasher
part ,_ NOTE: Use on y
_- -3_ UL Listed/CSA
Approved parts.
(Part I ff _
Number 4396672) 'J '_
To order parts, caff 1-800-469-4663, for Part Number above,
or see local electrical/plumbing supply retailer for equivalent.
Optional Accessory Parts Available:
Moisture BarderTape
NOTE: Moisture barrier tape is
an optional, added level of
protection if installing a
dishwasher under a wooden
countertop.
(Part
Number 4396277)
Side Panel Kit
For enclosing the side of
the dishwasher when
installing it at the end of
your cabinetry.
(Part Number _
varies with
color)
To order parts, call 1-800-469-4663,for PartNumber above.
First-time Installatlons=
Check local codes. Check existing electrical supply. See the
"Electrical Requirements" section, it is recommended that
electrical connections be made by a licensed electrical
installer.
Additional Tools Needed:
Additional Ports Needed (not provided)
Coppe_ tubing (%" screw:TyPe Opti0na!,L0nge[
O,D. suggested)Clamps Drain Hose Maximum
or Rexible Braided 11/2,. 2" length: 12 ft (3.7 m)
Water Supply Line (3.8!- 5cm) NOTE:Must meet
Kit (Part Number (3 maximum) AHAM/IAPMO test
W10278635RP), Kit . standards, fit 1,
includes Braided (2,5 cm)drain
Hose and %,' connection, and be
Compression x 3/4, resistant to heat and
HoseF tt ng detergent,
1-®)TORX,T15, and T20 are registered trademarks of Acument Intellectual Properties, LLC.
To order parts; call 1.800'469_466& for part number above,
or see local electrical supply retailer for equivalent.
Loading ...
Loading ...
Loading ...