Loading ...
Loading ...
Loading ...
Adjust wheels and legs
Turn both leveler legs to the same height. Put wheels in the
required position determined from "Dishwasher Height
Adjustment Chart."
Built-up floors: If the kitchen floor is higher than the cabinet
opening's floor - for example, the kitchen floor tile does not
extend into the cabinet opening - add shims as needed in the
area shown to bring the dishwasher up to 34" (86.4 cm) below
the countertop.
NOTE= Shims must be securely attached to floor to avoid
movement when the dishwasher is in use.
Mounting stud
Handle
Setscrew
(in bottom
of handle)
Hex key
IMPORTANT= Do not scratch the front panel during this
procedure.
Remove the door handle and hardware bag containing the
setscrews and hex key from the cardboard box. Setscrews are
already installed in the handle. Place handle on mounting studs
with the setscrews facing down. Pushthe door handle tightly
against the door. Insert the short end of the hex key into the
setscrews. Tighten the setscrews 1/4turn past snug.
Retain hex key with Installation Instructions.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
Stand dishwasher upright
Using 2 or more people, stand the dishwasher up.
NOTE= Do not install kick plate until instructed to do so.
For custom panel installation, refer to the Custom Panel
Installation Instruction Sheet (Part Number W10750117A).
Complete custom panel installation before proceeding to the
"Choose Attachment Option" section.
16
Loading ...
Loading ...
Loading ...