Loading ...
Loading ...
Loading ...
JAdd 90 ° elbow fitting to the
water supply line
i
Get 3/8" compression x 3/_" hose fitting with 90-degree elbow.
See the "Tools and Parts" section at the front of the guide for
part details and orders. Connect the 3/8"compression fitting of
the 90 ° elbow to the water supply line prior to installing the unit
into the cabinet opening. Attach such that the 3/4" connection is
facing upward, as shown above.
Copper tubing only: Put the tubing into the 90 ° elbow fitting as
far as it will go (the copper tubing bends and kinks easily). Slide
the nut and ferrule forward, and then start the nut onto the
elbow threads.
Flexible braided connection: Secure nut to elbow using 5/8" open
ended wrench or adjustable wrench.
NOTE: Do not use Teflon °_ tape with compression fittings.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
Water
Use 2 or more people to move and install dishwasher.
1-®)TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.
iMPORTANT: Double-check correct placement of utilities. Grasp
the sides of the dishwasher at the edges of the door panel. Tilt
dishwasher backward on wheels and move dishwasher close to
cabinet opening.
NOTE: Do not push on the front of the panel or on the console.
Panel or console may dent.
Helpful Tip: Temporarily tape utilities to the floor in the locations
shown to prohibit them from moving when dishwasher is moved
into the cabinet opening.
Check that water line is on the left-hand side of opening and
drain hose is near the center of the cabinet opening.
With another person holding the dishwasher to keep it from
tipping, open and close the door a few times. If the door closes
or falls open under its own weight, the door tension will need to
be adjusted.
]8
Loading ...
Loading ...
Loading ...