Loading ...
Loading ...
Loading ...
Option A_Remove Access Panel - Plastic Panel
Using a f}at-bJade screwdriver, turn the plastic fasteners 1/4turn
counterclockwise to unlock them. Remove panel. Do not remove
tech sheet from access panel.
Option B,Remove Access Panel - Metal Pane{
Using a 1/4" nut driver or Phillips screwdriver, remove 2 screws
attaching access panel and }ower pane} to dishwasher.
Do not remove tech sheet from access pane{.
NOTE: If using Option B, proceed to "Determine Cabinet
Opening," to continue with more of the installation of your
dishwasher before making the direct wire connection.
Option A_ PowerCord
Do not disconnect the green, black, or white dishwasher wires
already attached to the terminal box. There should be adequate
length in these wires to pu[} the terminal box out from under the
dishwasher if you lift the wires off of the nearby clips or
components being used to keep them off the f}oon
Use a 1/4" nut driver or 1/4" hex-head socket wrench to remove
the screw that holds the terminal box to the cross brace. Then,
tJ}t the terminal box, free the tab and lift the terminal box away
from the crossbar. Remove the cover by sliding it up and lifting
its hooks out of the slots. Retain cover for later use.
Install strain relief
Install a UL Listed!CSA Approved metallic strain relief. Make
sure screw heads are facing up when tightening conduit nut.
Strain relief is provided with the power cord kit. See the "Tools
and Parts" section at the front of the guide for part details and
orders.
13
Loading ...
Loading ...
Loading ...