Loading ...
Loading ...
Loading ...
Place the small drain hose clamp onto the small end of the drain
hose. Push the new drain hose into the rubber drain hose
connector up to the drain hose stop.
Using pliers, squeeze open the small drain hose clamp and slide
onto connector between stops.
NOTE; If the power cord was connected earlier, proceed to
"Secure Dishwasher in Cabinet Opening" section.
Option B_Direct Wire
Install a UL Listed!CSA Approved metallic strain relief. See the
"Tools and Parts" section at the front of the guide for part
details and orders.
Route cable so that it does not touch dishwasher motor or lower
part of dishwasher tub. Pull cable through UL Listed/CSA
Approved strain relief in terminal box.
Note: A maximum of two field wiring supply conductors
(12 AWG largest size) plus one grounding conductor are
permitted in the terminal box.
21
Loading ...
Loading ...
Loading ...