Loading ...
Loading ...
Loading ...
Safety information
WARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an ac‐
cident. Before exiting, secure the vehicle
against rolling.
In order to ensure that the vehicle is secured
against rolling away, observe the following:
▷ Set the parking brake.
▷ On uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.
▷ On uphill grades or on a downhill slope,
also secure the vehicle, e.g., with a wheel
chock.◀
Selector lever positions
Drive mode D
Selector lever position for normal vehicle oper‐
ation. All gears for forward travel are activated
automatically.
Reverse R
Engage selector lever position R only when the
vehicle is stationary.
Neutral N
In selector lever position N, the vehicle may be
pushed or roll without engine power, for in‐
stance in vehicle washes; see the Care chap‐
ter.
Parking position P
Selector lever position, for instance for parking
the vehicle.
The transmission blocks the drive wheels in
selector lever position P.
Engage selector lever position P only when the
vehicle is stationary.
Selector lever position P is engaged automati‐
cally in the following situations:
▷ After the engine is switched off when the
vehicle is in radio-ready state, refer to
page 69, or when the ignition is switched
off, refer to page 69, and when selector
lever position R or D is set.
▷ If, with the vehicle stationary and the selec‐
tor lever in position D or R, the driver's
safety belt unbuckled, the driver's door is
opened, and the brake pedal is not de‐
pressed.
Engaging selector lever positions
General information
To prevent the vehicle from creeping after you
select a drive mode, maintain pressure on the
brake pedal until you are ready to start.
Functional requirements
Only when the engine is running and the brake
pedal is depressed is it possible to change
from selector lever position P to another selec‐
tor lever position.
Engaging selector lever position D, N,
R
A selector lever lock prevents the following
faulty operation:
▷ Unintentional shifting into selector lever
position R.
▷ Unintentional shifting from selector lever
position P into another selector lever posi‐
tion.
1. Press and hold the button to release the
selector lever lock.
Seite 81
Driving Controls
81
Online Edition for Part no. 01402977904 - II/17
Loading ...
Loading ...
Loading ...